Topcon’s GLS-1500 laser scanner is the newest TOF laser scanner on the market and offers the best combination of data quality, accuracy and ergonomics in one package . The operator-friendly design allows for quick and hassle-free setups which saves time and improves productivity. With batteries and data collector on-board, Topcon’s GLS-1500 is lightweight and cable-free. While other laser scanners take two people to unload, setup, operate, and load, the GLS-1500 is a one-man instrument that operates with the ease and familiarity of traversing with a total station.
We believe in offering laser scanning solutions rather than black boxes surrounded by marketing hype. Therefore every GLS-1500 system purchased from us comes with:
- tilt mount adapter to achieve high quality overhead scans
- robust backpack to transport your scanner to difficult locations
- high-end Dell laptop loaded with the latest Scanmaster 2 software
- Full training ans support, on the job if necessary…. all at a price that is better than ever
Small size, big performance
This robust scanner sends out a laser beam that captures data at 30,000 points per second at a range of 500 ft. (150m) to a typical surface, and with an extended range to 1640 ft. (500m) for more reflective surfaces. Unique to Topcon’s GLS-1500 is the mechanical ability to select from multiple lens arrays to control the laser beam. This provides consistent 0.16 in. (4mm) accuracy throughout the range from 3 ft. to 500 ft. (1m to 150m), and very good accuracy beyond this to its maximum 500m range.
On-board Data Collection
The GLS-1500 has an on-board data collector with an LCD display and a 21-key keyboard. This gives the scanner the freedom to function as a stand-alone laser scanner with no connection to a computer. The latest firmware allows rapid acquisition via pre-configured scan patterns.
Eye-safe and Efficient
Use the GLS-1500 anywhere without worrying about damaging the eyes of a passersby. The GLS-1500 uses an invisible, Class 1, eye-safe laser. Scan near airports, busy traffic, and populated areas with no effect to the people or the environment. In addition, the use of a Class 1 invisible laser offers the benefit of low power consumption. With lower power consumption, the GLS-1500 can operate at longer times with fewer battery changes.
Built-in Digital Camera
Reduce the amount of equipment needed in the field with the GLS-1500’s built-in digital camera. Collect sharp and detailed images from the scanning location, or connect to a PC with ScanMaster software, and stream a live video feed of the jobsite to aid in scan setup and data acquisition
GLS-1500 features also include:
- Compact all in 1 design
- Precise Scan Technology
- On-board lithium ion batteries
- Hot swappable batteries
- Wireless Lan & USB connectivity
- Dual axis compensators
- 30,000 points/second scan rate
- 500m maximum range at 90% reflectivity
- 150m maximum range at 18% reflectivity
- 4mm @ 150m single point accuracy
- 6” horizontal and vertical angular accuracy (3″ for target scans)
- SD card data storage
- Horizontal and vertical jogs
Advanced technology in an operator-friendly design:
Precise Scan Technology
The GLS-1500 integrates pulse-based time of flight and phase-based technologies to achieve industry-leading accuracy and “clean” scan data.The GLS-1500 inherently has:
- Less point cloud noise
- The most consistent scanning accuracy
- The ability to detail slight texture variations
- Great results at ranges over 330 ft. (100m)
Wireless LAN & USB ConnectivityThe GLS-1500 offers wireless LAN (802.11b) and USB 2.0 PC connection. With the GLS-1500’s built-in wireless LAN communication, you can control and collect image and scanning data on a PC from your car.
Dual Axis CompensatorsThe use of dual axis compensators allows for more accurate instrument setups and scans. Occupy a known coordinate and backsight so traversing within one coordinate system is possible. Compensators can be turned off for tiltable mounts.
On-board Lithium-ion BatteriesThe GLS-1500 uses four hot-swappable batteries, two per side. With the lower power consumption of the Class 1 laser, the GLS can operate for 4-5 hours doing a continuous scan on one set of batteries at a temperature of 68°F (20°C).